PA12法国阿科玛35R53 SP01

Arkema Pebax® Rnew® 35R53 SP 01 Polyether Block Amide (PEBA) Polyether block amide Pebax® 35R53 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant. Physical Properties Metric Comments Density  1.02 g/cc ISO 1183 Water Absorption  1.30% Sim. to ISO 62 Moisture Absorption  0.50% Sim. to ISO 62 Linear Mold Shrinkage, Flow  0.0060 cm/cm ISO 294-4 2577 Linear Mold Shrinkage, Transverse  0.0060 cm/cm ISO 294-4 2577 Hardness, Shore D  25 ISO 868 @Time 15.0 sec Elongation at Break  >= 50 % Conditioned; ISO 527-1/-2 Tensile Modulus  0.0400 GPa Conditioned; ISO 527-1/-2 50% Modulus  5.00 MPa Conditioned; ISO 527-1/-2 Flexural Modulus  0.0400 GPa Conditioned 15 days at 23°C - 50% RH; ISO178 Charpy Impact Unnotched   NB Conditioned; ISO 179/1eU @Temperature 23.0 °C NB ISO 179/1eU @Temperature 23.0 °C NB ISO 179/1eU @Temperature -30.0 °C NB Conditioned; ISO 179/1eU @Temperature -30.0 °C Charpy Impact, Notched   NB Conditioned; ISO 179/1eA @Temperature 23.0 °C NB ISO 179/1eA @Temperature -30.0 °C NB ISO 179/1eA @Temperature 23.0 °C NB Conditioned; ISO 179/1eA @Temperature -30.0 °C Melting Point  135 °C 10°C/min; ISO 11357-1/-3 Vicat Softening Point  81.0 °C 50°C/h 50N; ISO 306 Melt Temperature  210 °C Injection Molding; ISO 294 Mold Temperature  25.0 °C Injection Molding; ISO 10724 Descriptive Properties Features Heat stabilized or stable to heat Light stabilized or stable to light UV stabilized or stable to weather Form Pellets Processing Methods Casting Film Extrusion Injection Molding Other Extrusion Profile Extrusion Thermoforming Transfer Molding